FreshBSD

    Adapted for TOOL_DEPENDS recently introduced to pkgsrc.
    ++pkgrevision

    Updated pkgtools/pkg_summary-utils to 0.62.0

    Version 0.62.0
    
      pkg_src_summary:
         - Option -t was added. If applied a value of TOOL_DEPENDS
           is added to BUILD_DEPENDS. This option works just like -b
           does for BOOTSTRAP_DEPENDS.
    
      pkg_cmp_summary:
         - Fixes for -A and -O. Now they output an empty line after each
           compared package even if it appeares multiple times in
           pkg_summary1. So, the output is now consistent.
    
      Last change time was updated for manual pages

    Added security/py-oauth2 version 1.5.211

    New package py-oauth2

    Use MASTER_SITE_BACKUP because tarball downloaded from original site changes from time 
to time

    fix for build failure caused by my recent lirc commits

    fix for build failure caused by my recent lirc commits

    Add option "lirc" and enable it by default when available, tested on RHEL-6

    Add option "lirc" and enable it by default when available, tested on RHEL-6

    Add option "vaapi" and enable it by default when available; Tested on RHEL-6 with 
VDPAU backend

    Add option "vaapi" and enable it by default when available; Tested on RHEL-6 with 
VDPAU backend

    Add option "vaapi" and enable it if it is supported.
    Explicitely add --enable-vdpau if "vdpau" option is turned on.
    ++pkgrevision.

    Add option "vaapi" and enable it if it is supported.
    Explicitely add --enable-vdpau if "vdpau" option is turned on.
    ++pkgrevision.

    Enable VAAPI only on Linux, FreeBSD and OpenBSD(unsure)

    Enable VAAPI only on Linux, FreeBSD and OpenBSD(unsure)

    "vaapi" option was added and enabled by default on systems where it is
    supported. Tested on RHEL-6 with VDPAU as a backend.

    "vaapi" option was added and enabled by default on systems where it is
    supported. Tested on RHEL-6 with VDPAU as a backend.

    Add option vaapi and enable it if it is supported.
    Explicitely add --enable-vdpau if "vdpau" option is turned on.
    ++pkgrevision.

    Add option vaapi and enable it if it is supported.
    Explicitely add --enable-vdpau if "vdpau" option is turned on.
    ++pkgrevision.

    Added option vaapi

    Added option vaapi

    + libva-driver-vdpau

    + libva-driver-vdpau

    Added multimedia/libva-driver-vdpau version 0.7.4

    Added multimedia/libva-driver-vdpau version 0.7.4

    libva-driver-vdpau (VDPAU backend for VAAPI)

    libva-driver-vdpau (VDPAU backend for VAAPI)

    Add new package libva-driver-vdpau (VDPAU-based backend for VAAPI)

    Updated multimedia/libva to 1.1.0

    Updated to 1.1.0. A lot of changes since 1.0.6, see NEWS file.

    Remove empty patch, thanks to Patrick Welche for pointing out

    Updated wm/afterstep to 2.2.11

    Fix build failure with png-1.5. Update to 2.2.11

    Fix for Minix. Thanks to Thomas Cort. ++pkgrevision

    Updated pkgtools/pkg_summary-utils to 0.61.0

    Updated pkgtools/pkg_summary-utils to 0.61.0

    Version 0.61.0, by Aleksey Cheusov, Fri,  8 Mar 2013 16:23:05 +0300
    
      All script use TMPDIR environment variable for creating temporary
      files if it is set.
    
      makefiles2deps works dramatically faster!

    Version 0.61.0, by Aleksey Cheusov, Fri,  8 Mar 2013 16:23:05 +0300
    
      All script use TMPDIR environment variable for creating temporary
      files if it is set.
    
      makefiles2deps works dramatically faster!

    "paexec -t ''" is equivalent to "paexec" with no transport; ++pkgrevision

    "paexec -t ''" is equivalent to "paexec" with no transport; ++pkgrevision

    Updated pkgtools/nih to 0.11.0

    Updated pkgtools/nih to 0.11.0

    Version 0.11.0, by Aleksey Cheusov, Fri,  8 Mar 2013 15:56:56 +0300
    
      nih install:
        - Order of packages does matter
          ("nih install emacs- editors/emacs22" is correct)
        - Option -P and new config variable NO_REQPROV_CHECK were added
        - Option -L and new config variable NO_REMOVE_LEAVES were added
        - "Nothing to be done" message is output if everything is up-to-date
        - Download failures and cksum failures are handled differently
        - Handling CONFLICTS between installed packages and packages to
          install are handled differently. Now package splits and similar
          problems are resolved with a help of "fake" packages. Fake
          packages are always marked for updates.
          New option -f for "nih list" was added in order to list them
        - Improvemed download progress messages
    
      nih uninstall:
        - Option -L was added, see "nih install -L"
        - Options -p and -P were added. See "nih install"
    
      nih leaf:
        - Command was reimplemented and simplified
        - Option -t option was removed
          pkg_status doesn't have -ltRn options anymore
        - Option -r was added

    [14 lines not shown]

    Version 0.11.0, by Aleksey Cheusov, Fri,  8 Mar 2013 15:56:56 +0300
    
      nih install:
        - Order of packages does matter
          ("nih install emacs- editors/emacs22" is correct)
        - Option -P and new config variable NO_REQPROV_CHECK were added
        - Option -L and new config variable NO_REMOVE_LEAVES were added
        - "Nothing to be done" message is output if everything is up-to-date
        - Download failures and cksum failures are handled differently
        - Handling CONFLICTS between installed packages and packages to
          install are handled differently. Now package splits and similar
          problems are resolved with a help of "fake" packages. Fake
          packages are always marked for updates.
          New option -f for "nih list" was added in order to list them
        - Improvemed download progress messages
    
      nih uninstall:
        - Option -L was added, see "nih install -L"
        - Options -p and -P were added. See "nih install"
    
      nih leaf:
        - Command was reimplemented and simplified
        - Option -t option was removed
          pkg_status doesn't have -ltRn options anymore
        - Option -r was added

    [14 lines not shown]

    Updated devel/mk-configure to 0.24.0

    Updated devel/mk-configure to 0.24.0

    Updated parallel/paexec to 0.18.0

    Updated parallel/paexec to 0.18.0

    Version 0.24.0, by Aleksey Cheusov, Fri,  8 Mar 2013 13:18:00 +0300
    
      mkc.sub{dir,prj}.mk:
        - support for subprojects containing / symbol was added. In
          OBJDIR_<dir> variable slashes are replaced with underlines.
          In addition OBJDIR_<dir:T> variable is set.
        - now also run the target "errorcheck"
        - now work correctly with non-empty MAKEOBJDIR
          and MAKEOBJDIRPREFIX.
    
      Minor improvements in examples/*/linkme.mk
    
      DPLIBS is deprecated, use LDADD instead.
    
      ${MKC_SOURCE_FUNCLIBS}.o is added to CLEANFILES if it is set.
    
      Minor fixes in mkc_imp.lua.mk (LUA_MODULES vs. LUA_LMODULES).
    
      Some improvements and fixes in man page and FAQ.
      Thanks to Jeremy Reed, Min Sik Kim and Jan Smydke.