Displaying 1 45 of 132 commits (0.007s)

OpenBSD — sys/arch/amd64/conf GENERIC, sys/arch/i386/conf GENERIC

enable lisa(4);  tested by Marco Knol;  ok deraadt

OpenBSD — usr.sbin/snmpd mib.c

SENSOR_WATTS;  ok reyk deraadt
Delta File
+2 -1 usr.sbin/snmpd/mib.c
+2 -1 1 file

OpenBSD — usr.bin/systat sensors.c, usr.sbin/sensorsd sensorsd.c

SENSOR_WATTS;  ok canacar deraadt kettenis henning

OpenBSD — share/man/man4 lisa.4 iic.4

lisa(4) manual page

OpenBSD — sys/dev/i2c lis331dl.c i2c_scan.c

New lisa(4) driver for ST LIS331DL accelerometer in HP 2133 Mini-Note PC;  ok deraadt

OpenBSD — sbin/bioctl bioctl.8

Xr cac(4) && mpi(4);  ok marco
Delta File
+4 -2 sbin/bioctl/bioctl.8
+4 -2 1 file

OpenBSD — share/man/man4 aibs.4

    add a NOTES section, explaining the difference between aibs(4) and lm(4) et al;  ok 
marco
Delta File
+63 -2 share/man/man4/aibs.4
+63 -2 1 file

OpenBSD — share/man/man4 km.4

mention the 0,125 resolution, which explains why sysctl(8) may show something
like "39.38 degC" (i.e. rounded from 39,375) on some newer Phenom II chips as
seen on misc
Delta File
+3 -2 share/man/man4/km.4
+3 -2 1 file

OpenBSD — sys/arch/amd64/conf GENERIC, sys/arch/i386/conf GENERIC

reserve a space for aibs(4) in amd64 and i386, commented out for now; ok deraadt

OpenBSD — share/man/man4 aibs.4 Makefile

aibs(4) manual page

OpenBSD — sys/dev/acpi atk0110.c files.acpi

New aibs(4) driver for ASUSTeK AI Booster (ACPI ATK0110) hardware monitoring,
with sensor state support through limits provided by the ACPI.

Tested on several ASUS motherboards kindly networked by Sam Fourman Jr.

ok deraadt marco jordan

OpenBSD — share/man/man4 bio.4 mpi.4

enlist mpi(4) and softraid(4) in bio(4) && Xr bio(4);  ok marco

OpenBSD — sys/dev/i2c i2c_scan.c

check 4 (instead of merely 2) addr bits for probing sdtemp(4) chips;  ok deraadt
Delta File
+8 -8 sys/dev/i2c/i2c_scan.c
+8 -8 1 file

OpenBSD — sys/dev/i2c sdtemp.c

fix the complement in the 2's complement patch from yesterday;  ok deraadt
Delta File
+2 -2 sys/dev/i2c/sdtemp.c
+2 -2 1 file

OpenBSD — share/man/man4 sdtemp.4, sys/dev/i2c i2c_scan.c sdtemp.c

support onsemi's cat34ts02 and cat6095;  ok deraadt

OpenBSD — sys/dev/i2c sdtemp.c

the temperature value is really a 13-bit 2's complement;  ok deraadt
Delta File
+4 -5 sys/dev/i2c/sdtemp.c
+4 -5 1 file

OpenBSD — sys/dev/i2c sdtemp.c

fix the mask for the sign bit and some comment;  ok deraadt
Delta File
+3 -3 sys/dev/i2c/sdtemp.c
+3 -3 1 file

OpenBSD — sys/dev/acpi acpithinkpad.c

.desc field of the sensor struct shall not duplicate .type and .numt;  ok jordan
Delta File
+4 -6 sys/dev/acpi/acpithinkpad.c
+4 -6 1 file

OpenBSD — sys/kern tty_nmea.c tty_msts.c

    don't zero sensor .value and .flags immediately after the allocation w/ M_ZERO; ok 
deraadt
Delta File
+1 -3 sys/kern/tty_nmea.c
+1 -2 sys/kern/tty_msts.c
+2 -5 2 files

OpenBSD — sys/dev vmt.c, sys/dev/acpi acpithinkpad.c acpitz.c

in ca_attach() there is no need to set .value and .flags of sensors to 0,
since autoconf(9) allocates softc with M_ZERO;  ok deraadt
Delta File
+1 -5 sys/dev/pci/mbg.c
+1 -5 sys/dev/usb/umbg.c
+1 -5 sys/dev/gpio/gpiodcf.c
+1 -5 sys/dev/usb/udcf.c
+1 -3 sys/dev/acpi/acpithinkpad.c
+1 -3 sys/dev/vmt.c
+3 -6 3 files not shown
+9 -32 9 files

OpenBSD — sys/dev/i2c sdtemp.c

remove a meaningless sensor.desc;  ok deraadt
Delta File
+1 -3 sys/dev/i2c/sdtemp.c
+1 -3 1 file

OpenBSD — sys/dev/acpi acpitz.c

    zero temperature in acpi refers to -273,2degC -- convert to uK appropriately;   ok 
deraadt marco
Delta File
+2 -2 sys/dev/acpi/acpitz.c
+2 -2 1 file

OpenBSD — sys/dev/isa sch311x.c

use more appropriate sensor_task_register(9) paradigm;  ok mk
Delta File
+6 -3 sys/dev/isa/sch311x.c
+6 -3 1 file

OpenBSD — sys/dev/isa sch311x.c

* eliminate redundant initialisations of .desc and .value
* .status should never stay at OK permanently
* use .flags more sparingly
ok mk
Delta File
+4 -30 sys/dev/isa/sch311x.c
+4 -30 1 file

OpenBSD — sbin/disklabel editor.c

    clean up find_bounds(), no binary change;  'dead initialisation' llvm/clang;  ok krw 
millert
Delta File
+7 -8 sbin/disklabel/editor.c
+7 -8 1 file

OpenBSD — sbin/disklabel editor.c

    fix an 11-year-old typo in an if statement;  'null dereference' llvm/clang;  ok 
millert
Delta File
+3 -3 sbin/disklabel/editor.c
+3 -3 1 file

OpenBSD — sys/dev/pci if_wpi.c

don't overwrite an error code from wpi_init() in wpi_ioctl(), logic is
now in line with iwn_ioctl();  'dead assignment' llvm/clang;  ok damien
Delta File
+2 -2 sys/dev/pci/if_wpi.c
+2 -2 1 file

OpenBSD — sys/dev/i2c spdmem.c

remove more logically irrelevant DDR code from the SDR function;  ok jsg
Delta File
+18 -30 sys/dev/i2c/spdmem.c
+18 -30 1 file

OpenBSD — sys/dev/ic ciss.c

remove unused variable 'error' from two functions;  llvm/clang;  ok dlg
Delta File
+1 -5 sys/dev/ic/ciss.c
+1 -5 1 file

OpenBSD — sys/dev/pci if_sis.c

don't assign ifp to ifp;  llvm/clang;  ok jsg
Delta File
+2 -2 sys/dev/pci/if_sis.c
+2 -2 1 file

OpenBSD — sys/dev/i2c spdmem.c

remove some dead code and fix a comment;  llvm/clang;  ok jsg
Delta File
+4 -16 sys/dev/i2c/spdmem.c
+4 -16 1 file

OpenBSD — sys/dev/i2c lm87.c

uninitialised value caused some lmenv(4) fans to never appear sometimes;
the bug was reported long time ago by Simon Slaytor with adm9240;
the eyes were cleared today by LLVM/Clang Static Analyser;  ok deraadt
Delta File
+3 -2 sys/dev/i2c/lm87.c
+3 -2 1 file

OpenBSD — sys/dev/i2c i2c_scan.c lm78_i2c.c

support w83627dhg at i2c (as seen on Sun Ultra 24 via dmesg@)    ok deraadt@

OpenBSD — share/man/man4 km.4 pci.4, sys/dev/pci km.c

support AMD Family 11h (Turion X2 Ultra et al);  discussed with jsg@ and jmc@
Delta File
+11 -4 share/man/man4/km.4
+3 -3 share/man/man4/pci.4
+3 -2 sys/dev/pci/km.c
+17 -9 3 files

OpenBSD — usr.sbin/sensorsd sensorsd.c

When there are no sensors, don't run the hotplugging consistency check,
the logic of which assumes that there is at least one sdlim.
ok henning
Delta File
+3 -1 usr.sbin/sensorsd/sensorsd.c
+3 -1 1 file

OpenBSD — sys/dev ipmi.c

replace the last missing xname header before an error message in get_sdr(); ok deraadt
Delta File
+3 -2 sys/dev/ipmi.c
+3 -2 1 file

OpenBSD — usr.sbin/sensorsd sensorsd.c

When a hotplugged sensordev appears, load its configuration individually,
instead of reloading the configuration for all sensordevs.
ok henning
Delta File
+9 -13 usr.sbin/sensorsd/sensorsd.c
+9 -13 1 file

OpenBSD — usr.sbin/sensorsd sensorsd.c

* Remove the exit condition on no sensors at start-up, since we now support
  hotplugging.
* Factor out some code from main() into a new create() procedure, to save
  some memory and make the code tidier.
ok henning
Delta File
+31 -27 usr.sbin/sensorsd/sensorsd.c
+31 -27 1 file

OpenBSD — usr.sbin/sensorsd sensorsd.c

Support hotpluggable sensors (e.g. the post-4.2 ipmi0 created by the
deferred thread, as well as some timedelta sensors).

ok henning, ckuethe
Delta File
+85 -4 usr.sbin/sensorsd/sensorsd.c
+85 -4 1 file

OpenBSD — sys/dev/i2c adm1026.c

* fix the order of precedence in the divisor bits calculation
* correct the constant in the fanrpm formula
ok deraadt
Delta File
+10 -10 sys/dev/i2c/adm1026.c
+10 -10 1 file

OpenBSD — sys/arch/amd64/conf GENERIC, sys/arch/i386/conf GENERIC

enable km(4);  ok deraadt

OpenBSD — share/man/man4 km.4 pci.4

km(4) manual page

OpenBSD — sys/dev/pci km.c files.pci

New km(4) driver for AMD Family 10h Processors (Phenom, Opteron Barcelona etc);
ok deraadt
Delta File
+119 -0 sys/dev/pci/km.c
+6 -1 sys/dev/pci/files.pci
+125 -1 2 files

OpenBSD — share/man/man4 sdtemp.4

s/NPX/NXP/g -- a separate legal entity of Philips is equally misspelled. ;)
Delta File
+3 -3 share/man/man4/sdtemp.4
+3 -3 1 file

OpenBSD — sys/dev/i2c adt7462.c

* correct the names of the register defines
* describe the temperature sensors as 'Internal' / 'External'
* no need for sensor description enumeration

'sure' deraadt
Delta File
+15 -12 sys/dev/i2c/adt7462.c
+15 -12 1 file

OpenBSD — sys/dev/i2c i2c_scan.c

unbreak the ignore_addrs logic (the 'continue' was obviously meant to affect
another preceding 'for' loop);

reported by krw and kettenis;  better diff from millert;  'get it in' deraadt
Delta File
+4 -2 sys/dev/i2c/i2c_scan.c
+4 -2 1 file

OpenBSD — distrib/notes/amd64 hardware, distrib/notes/i386 hardware

sync the hw sensors sections with the html pages, enlisting many new sensors

OpenBSD — sys/dev/i2c i2c_scan.c

toast unused args from a printf call;  ok deraadt
Delta File
+2 -2 sys/dev/i2c/i2c_scan.c
+2 -2 1 file

OpenBSD — sys/dev/i2c i2c_scan.c

match more versions of w83793g;  whilst here, also ensure that the bank 0
registers are only tested if bank 0 is selected;  'looks ok' deraadt
Delta File
+5 -4 sys/dev/i2c/i2c_scan.c
+5 -4 1 file

OpenBSD — sys/arch/amd64/conf GENERIC, sys/arch/i386/conf GENERIC

enable kate(4); ok deraadt@